 |
Model Revolution -
Slitter / Rewinder: The Revolution is designed to slash setup
times. With a segmented top riding roll to eliminate setup, auto knife
positioning system and a hard stop core locating system with positioning
feedback, the Revolution quickly and easily sets up your jobs and gets you up
and running. |
|
 |
 |
Model 835 - Slitter /
Rewinder: Fast, flexible, and feature rich duplex center winder.
Able to wind the most difficult off-caliper products from the thinnest films to
the heaviest substrates. Quick setup times, fast unloading, and numerous
configuration options provide for the highest productivity available. |
|
|
 |
Model 10000 - Slitter /
Rewinder: Duplex center winder capable of handling the most
extreme parameters. Cost effective solution for wide material web widths and
large rewind diameters. |
|
|
 |
Model 465 - Slitter /
Rewinder: High speed duplex center winder for large diameter
rewind packages. Linear tracking top riding roll system guarantees a reduced
draw to the rewind package during the entire run. |
|
|
 |
Model 636LS - Slitter /
Rewinder: Entry level center winder for thermal transfer
ribbons. Automatic tension control system for optimum quality rolls. Designed
for the first time converter. Minimum investment-maximum return. |
|
|
 |
Model 636 - Slitter /
Rewinder: High output double turret center winder for all
thermal transfer ribbons. Interchangeable winding shafts for winding on a wide
range of core sizes and core materials. |
|
|
 |
Model 636/632 - Slitter /
Rewinder: The addition of the Model 632 automates the insertion
of the leader/trailer (splice) panel in only 18 seconds with no manual
intervention. A single movement cuts out the waste panel and lays down the
leader/trailer to guarantee high output and minimum cycle times. |
|
|
 |
Model 637 - Slitter /
Rewinder: Totally automatic thermal transfer ribbon slitter
combining the automatic leader/trailer unit (Model 632) with robotic core
loading, slit roll unloading and delivery of the finished packages. Continuous
output with no unproductive downtime. Touch screen controls continuously
monitor all machine functions. |
|
|
 |
Model 335 - Slitter /
Rewinder: Automated dual duplex turret center winder with auto
cutoff and auto transfer. Rewind shafts supported throughout the turreting
process. Finished slit rolls easily unloaded and rewind shafts quickly recored
during the winding cycle. |
|
|
 |
Model 635 - Slitter /
Rewinder: Center winder for rewind diameters up to 21". Can be
outfitted with tooling for a variety of slitting modes and material
applications. Its durable construction has made this machine the workhorse of
the industry for decades. |
|
|
 |
Model 485 - Slitter /
Rewinder (patented): High speed duplex center winder.
Uses the features designed into the Model 465 and adds totally automatic unloading of the
rewind packages. |
|
|
 |
Models 804- 807 - Slitter /
Rewinder: Primary film overhead center winders. Equipped with
individual rewind arms and pneumatically controlled touch rolls for speeds up
to 3000 FPM. Web widths to 8 meters. |
|
|
 |
Model 633 - Slitter /
Rewinder: Duplex center winder designed for narrow web
converting. Fully cantilevered with integral unwind and splice table. |
|
|
 |
Model 839 - Slitter /
Rewinder: Duplex center winder for photographic paper industry.
Features automatic tail cut-off and feed for use in a darkroom environment.
Automatic feed extends the tails to the required lengths so that the material
can be cinched to the cores without material waste. |
|
|
 |
Model 740 - Slitter /
Rewinder: High speed duplex center winder with photocell
controlled minimum gap rewind ability. Designed for a wide range of materials
from non-wovens to papers. Particularly suited for narrow slit widths combined
with large rewind diameters. |
|
|
 |
Model 416 - Slitter /
Rewinder: Narrow width table top machine for salvage
winding/reclaim of badly wound TTR rolls. Can be used to cut down wider rolls
for sample purposes. |
|
|
|
